|
Mistral is a powerful thermal glider with ailerons and wing flaps There
is a continuos wing deflection that makes its shape ideal. Fiberglass wing endings are
bent down which improves flying characteristics. Mistral is ideal for slope and thermal
flying. This electric version is great for any weather conditions and with the S3021
airfoil will penetrate well in wind while still being able to work reasonably light lift.
We suggest a geared brushless motor system with Li-poly batteries for best performance and
lightest weight.
The Mistral has ailerons, flaps, elevator, rudder and throttle as the
controls, two servos each for the ailerons and flaps. We recommend using the HS-85BB
servos for the ailerons, rudder, and elevator, and the HS-85MG for the flaps. For the best
overall setup you can go to the HS-125MG for both flaps and ailerons. These are wing
servos and make for a very nice flat installation. For the receiver we suggest a 7 channel
receiver.
The Mistral is a nice size for local schoolyard flying and with the flaps
and can land easily in a small area. The fiberglass fuselage is white gelcoated with an
extended blue canopy making for easy access to the battery and radio system. you can
remove the battery through the canopy so need to remove the wing. The fuselage sports an
integrated fin for the T-tail elevator and stab. The two piece wing and tail simply bolts
onto the fuselage and will break down back into the original shipping box for
transportation. There is plenty of room in the fuselage for all the gear plus either a 10
cell Nicad or Nimhd or a 3 cell Li-poly battery. The wings are very nicely done, sheeted
with balsa and covered with Oracover and are reinforced with fiberglass between the balsa
and foam for added strength.
The slight polyhedral to the wings makes for nice easy handling and
coupled with the airfoil and light wingloading makes for a very nice thermaling sailplane!
Special Features:
- Fiberglass fuselage, reinforced with skid in upper part
- Foam core balsa/fiberglass sheeted two-pieces wing with fiberglass endings
and fiberglass layer between balsa and foam
- Made by CNC technology
- Special wing design and structure result in extremely stiff, but yet very light
construction extended GFK fiberglass canopy makes easy access to RC parts
- 8 and 3 mm steel rod wing joiners
- Pre-hinged ailerons and flaps
- Oracover on wings and balsa tail parts
- Tight covering, with all seams hand-sealed
- Includes all necessary hardware
Medusa Motor System-lgsail-lipoly
These Medusa motors are simply awesome. They are as good or better than the Aveox motor
and at a more reasonable price. We are VERY glad we found them! The Medusa MR-028-056-1900
is equivalent to the Aveox 2729/1.5 but a little more efficient and a little more thrust.
Here is what you get: The Medusa MR- 028-056-1900 with Planetary 4.3-1 Gear drive, Phoenix
45 brushless sensorless speed control, 3-cell 4000 mah Li-Poly, folding Cam prop, spinner
and hub as well as all connectors and hardware. This will take this machine skyward at a
very rapid rate of climb!
Related Products
|
