|
These tiny "External Rotor" (
called outrunner) brushless motors are very powerful but most of all they are very easy to
use and extremely silent running. You could be only 20 feet away and all you will be able
to hear is a faint noise from the whirling prop! They give a different
"feel" to the flying of the model airplane: At half throttle, you'll feel that
the motor is silently pulling the airplane through the air at flying speeds --
effortlessly. Using the recommended Castle Creations, Phoenix or the MGM compro Speed
controls will give you smooth and fast throttle response. Then when you open the throttle
to FULL you'll see your airplane shoot ahead like you've never seen before -- effortlessly
and silently.
 |
PJS 3D 300 Tiny
1 oz. motor for planes like the Butterfly, Pleaser, etc.
10-1/2 oz. of thrust for an 8 oz.
airplane! 1-1/4" diameter, 1-5/16" long (from prop backplate to firewall
mounting surface), 4mm prop shaft, 1.12 oz. Direct drive high torque design. Use with 8
Nicad or NiMh cells and a Phoenix 10, ot TMM 0812 Esc and APC 9x4.7 or 10x4.7 prop. Also
great with 2 Lithium Polymer cells and APC 9x4.7 prop. Max efficiency at 6 amps. |
 |
PJS 500 Over 17
oz. of thrust, for planes like Cobra, Eagle
1-5/8" diameter, 1-1/2" long
(from prop backplate to firewall mounting surface), 4mm prop shaft, 1.76 oz. Direct drive
high torque design. Use with 8 Nicad or NiMh cells and a Phoenix 25 or TMM 1812 controller
and APC 10x4.7 or 11x4.7 prop. Max efficiency at 14 amps. |
 |
PJS 3D 550 Over 19 oz.
of thrust for aircraft such as the MicroBat, Too Cool, Extra 3D, Triangle, Cobra,
etc.
1-1/4" diameter, 1-1/2" long
(from prop backplate to firewall mounting surface), 4mm prop shaft, 1.76 oz. Direct drive
high torque design. Use with 8 Nicad or NiMh cells and a Phoenix 25 or TMM 1812 controller
and APC 10x4.7 prop. Max efficiency 13.5 amps. |
 |
PJS 3D 550R Over 19
oz. of thrust for aircraft such as the MicroBat, Triangle, Trick 800L, Extra 3D, Lil
Luscomb, Eagle and Cobra,
1-1/4" diameter, 1-1/2" long
(from prop backplate to firewall mounting surface), 4mm prop shaft, 1.76 oz. Direct drive
high torque design. Use with 8 Nicad or NiMh cells and a Phoenix 25 or TMM 1812 controller
and APC 9x3.8 prop. Great with 2 Lithium Polymer cells on Potensky Cobra and Eagle or
tricck 800L. Max efficiency 12.5 amps. |
 |
PJS 3D 800 Over 28 oz.
of thrust at under 20 amps for aircraft such as the Mamba, AcroPhat, Virus 400,
Cadet Acro, EZ-400G
WHY would anyone want this 800E which
produces 800 grams of thrust (28 oz.) over PJS1000 which produces 35 oz. of thrust? The
reason is the lower current consumption of 800E which will allow longer duration flights.
1-5/8" diameter, 1-1/2" long (from prop backplate to firewall mounting surface),
4mm prop shaft, 3 oz. Direct drive high torque design. Use with 8 Nicad or NiMh cells and
Phoenix 25 or TMM 2512 controller and APC 10x4.7 or 11x4.7 prop. 28oz of thrust
with an APC 11x4.7 prop and 8-1100 NiMh cells. Higher wind version of the PJS1000, is more
efficient. Produces less thrust (28oz. versus 35oz.) but at a much lower amp draw,
allowing you to fly longer or with lighter batteries. Max efficiency 19 amps. Good with
3-4 Lithium Poly batteries. |
 |
PJS 3D 100 Over 35 oz.
of thrust for the Accord 2, Javelin, Javelin 2, Virus 400Ae, Coronet Acro!
1-5/8" diameter, 1-1/2" long
(from prop backplate to firewall mounting surface), 4mm prop shaft, 3 oz. direct drive
high torque design. Use with 8 Nicad or NiMh cells and a Jeti 30-3P controller and APC
11x4.7 prop. This motor powers BIG props on direct drive. 35 oz. of thrust with an APC
11x4.7 prop and 8-1700 NiMh cells. Includes mounting flange. Is very easy to mount in an
airplane. Motor’s large diameter and tiny magnet-to-coil air gap results in
exceptional torque, thrust, and efficiency. Use Phoenix 35 or TMM 4012 controllers |
Specifications:
| Motor |
Weight (gms) |
Diameter (mm) |
Length (mm) |
Shaft Dia (mm) |
Max Thrust gms |
| PJS 3D 300 |
30 |
32 |
40 |
4 |
300 |
| PJS 3D 500 |
50 |
40 |
45 |
4 |
500 |
| PJS 3D 550 |
50 |
32 |
45 |
4 |
550 |
| PJS 3D 550R |
50 |
32 |
45 |
4 |
550 |
| PJS 3D 800 |
85 |
40 |
50 |
4 |
800 |
| PJS 3D 1000 |
85 |
40 |
50 |
4 |
1000 |
| Motor |
Kv (RPM/volt) |
No-load Current (amps) |
Rm (milliOhms) |
Props |
Battery (cells) |
Li-Poly (series) |
| PJS 3D 300 |
1135 |
0.8 |
36 |
9 x 4.7-10 x 4.7 |
6-8 |
2 |
| PJS 3D 500 |
1250 |
1.5 |
13 |
10 x 4.7- 11 x 4.7 |
6-8 |
2 |
| PJS 3D 550 |
802 |
1.0 |
220 |
10 x 4.7- 11 x 4.7 |
6-8 |
2-3 |
| PJS 3D 550R |
1225 |
1.5 |
90 |
9 x 3.8 |
8 |
2 |
| PJS 3D 800 |
1006 |
2 |
63 |
11 x 4.7 |
8 |
3 |
| PJS 3D 1000 |
1165 |
2.6 |
47 |
11 x 4.7 |
8 |
3 |
|
